How To Make Baby Headbands With Ribbon

Do you have a baby or are you going to before long? Has someone shut to you just given nativity? If yous accept a package of joy in your life, you lot tin brand a stylish and sweetness headband to start her on the road to fashion success! This article volition teach you how to make a gorgeous headband that can be worn by infants and toddlers, completely customizable to your particular needs and mode.

1. one

   Measure the head. Before yous tin can make the headband you will demand to know the appropriate size. This can be washed by measuring the individual or by using generalized measurements based on age or weight. If measuring in person, y'all will want to measure the circumference of the head, in roughly the same place that you intend the headband to go. This volition ordinarily be merely to a higher place the ears.

   • Methods. Babies are delicate and do not similar to hold notwithstanding, and then taking their measurements can exist challenging. If yous have a cloth measuring tape, utilize this. Avoid metal measuring tapes as they are inaccurate and may scratch the baby. If a fabric measuring tape is unavailable, measure the head using a length of soft string and and so comparison the cord to another measurement tool.
   • If the babe is not located nearby or if the baby has not yet been born, you may have to rely on generalized measurements. These can be found readily on the internet. Endeavour searching for standard sizes on sewing and arts and crafts websites and bulletin boards. Information technology may also be possible to detect another child of a similar size or age and measure their head.

2. 2

   Determine the dimensions. You lot will want to decide the appropriate width of the band. This volition largely depend on the size of the babe who will wear the headband, as a too-wide ring will not suit to the head and simply slip off. A newborn will likely not exist able to wear a ring much wider than half an inch. A six-month to one-yr-old baby will probably be able to wear a one inch ring. A toddler volition probably be able to wear a 2 inch band.

   • You lot may wish to test showtime before deciding. This can exist done past cutting chip fabric to try to visually guess the correct width or by having your babe try shop-bought bands first to find the proper size.

3. iii

   Choose your materials. The materials for the ring will largely depend on the type of ring you wish to make. Since babies have soft, fragile pare, stretchy and soft materials are best. Stretch jersey, velvet, or lace are best suited to babe headbands. This textile should form the band itself. More options are bachelor for embellishments, as these volition not be equally shut-plumbing equipment to the child's head.

4. 

   iv

   Cut your material. In one case you take chosen your material, it will exist necessary to cut it. Materials like jersey volition need to be doubled over in order to form a tube. If you choose to use a textile like stretch lace, however, doubling volition exist unnecessary.

   • For jersey, velvet and other total fabrics, yous volition desire to cut the material in a long rectangular shape, in order to exist able to eventually course a tube. Offset, cutting the length (using the head measurement taken earlier) so that at that place is a quarter to half-inch seam allowance on either stop. Cutting the width and so that it is twice the size you decided on, as well equally another quarter to half-inch extra seam allowance. These seam allowances should be on all sides.
   • Use appropriate tools. Using sewing shears is very of import when you lot cut the cloth, as dull blades tin lead to an uneven, unattractive edge.

5. 

   5

   Cut your elastic. Using the baby's head measurement, cutting a piece of elastic to that length. Do not shorten it to provide tension once placed on the head, as some of the length will be lost in the seam and you lot want to preserve equally much stretch as possible. Preserving some of the stretch and tension will permit the baby to wear the band for longer, likewise as helping to ensure that the band is not too tight.

1. 

   1

   Create the tube. At present you volition want to create the tube. This tube comprises the main section of the headband. It volition go around the head and embellishments will be added to it. Make information technology as even as possible just since it is fabricated of stretch fabric, near imperfections will be hidden naturally.

   • Fold the rectangle of fabric. If you've chosen to use stretch lace, this volition be unnecessary. If using other materials, fold it lengthwise so that the wrong side is facing outwards.
   • Pin the textile using direct pins, then that the long edges are in line with each other. Direct pins should be placed perpendicular to the long side of the textile. This will keep your sewing car from catching on a pin if you lot forget to remove one. It volition as well make it possible to sew correct over the pins too.
   • Sew the length of the textile, leaving your quarter to half-inch seam allowance and the ends open. Use a sew and sewing machine needle advisable to the fabric you take chosen. Stretchy fabrics will require a brawl-point needle and a stretch or zigzag run up. For evidently cotton a normal needle and straight sew together should suffice. The same methods can be done by hand but will be more than fourth dimension consuming.
   • Reverse the fabric. This tin be washed simply by mitt but it may be easier to use basic tools. The most common method is to employ a small safety-pin. Pin information technology at the end of the tub in such a way that the expressionless of the pin is within the tube. Begin pulling small sections of fabric over the pin and pushing the head down the length of the tube. This takes time but is fair simple. When you are done yous may wish to iron the tube flat, to create more of a ring appearance. Y'all may besides wish to forgo ironing, in favor of a looser, draped look.

2. 

   two

   Add the elastic. The elastic volition allow the headband to gently stay on your infant's caput, without constricting or requiring snaps or ties. Information technology will also let the band to grow with your baby, allowing her to wear information technology for longer. Be certain that you have enough elastic, as a too-tight ring is not good for your baby.

   • Feed the rubberband through the tube. This will be easiest if you place a safety-pin at one end of the elastic and use that to guide yous. Make sure that as you pull the elastic through the tube, the elastic remains flat.
   • Sew the two ends of the elastic together by hand or by motorcar. A zigzag or x-shaped stitch is good for this. Exist certain that the elastic is apartment and did not twist inside the tube.
   • Close the tube. While it is possible to utilize your auto, this pace works best when using hand stitching. Tuck the ends of the fabric in as much as possible. Use careful, small whip stitches to join the ends of the tube together. If y'all do not want to stitch by hand, close the tube with your machine, overlapping the fabric and sewing a line down the back. This method will exist more visible that hand-stitching. With the tube airtight, at present your band is done!

1. i

   Create a Bow. With the band done, yous will desire to add decorations in order to complete the await. A bow is a classic wait for young girls and is simple to create. This may be a good place to start when creating your own babe headbands.

   • To make a bow, y'all will need ribbon. Attempt to get fabric ribbon, equally plastic ribbon is not good for this purpose. Cull a ribbon that compliments the color of the band you lot take just created and appeals to your personal gustatory modality.
   • At that place are several unlike types of bow. You can make i which is unproblematic, like those used to necktie shoes, or you tin can make one that is more complex, like those bought to go along presents. For the unproblematic bow, tie a bow as normal. Take an extra inch or ii of ribbon and wrap information technology around the eye of the bow to hide the knot. Gum or sew this unto the band.
   • For a more circuitous bow, take a roll of ribbon. Holding the end down, make a loop about two inches long and then hold that down. Reverse and do the same thing on the other side. Contrary and repeat until your bow looks total. Use a single stitch to proceed information technology in place and then cover the centre as before. Glue or stitch this to the band.

2. ii

   Make a flower. Y'all may wish to go for a more than floral look with your headband. This is a not bad look for little girls and will give her a fairy-like advent. You can use one flower or glue multiple flowers together. You can use craft flowers, which wait realistic, a simply glue them on or you lot tin can create your own from textile.

   • Begin with pes-long, one inch wide strips of fabric. Try to utilize cloth which is contrasting but complementary to the band y'all have sewn. Any material blazon will practise, including basic cottons.
   • Glue this cloth around a pipage cleaner in a slightly uneven way. This will give the material a draped look.
   • Roll the pipe cleaner into a rosette shape. If yous are simply using one, it may be possible to then glue the blossom directly to your band. Otherwise, glue the flower or flowers into an organisation on a slice of felt. Cut the felt to ensure that it is not visible when looking at the flowers from to a higher place and then glue the felt to the band.

3. 3

   Employ sequins. For a more than fabulous await, you lot can utilise sequins. These are like shooting fish in a barrel to use and practise not require you to make annihilation extra. They come in a variety of colors and sizes and can be attached to your band to create many dissimilar patterns. Endeavour using varying sizes of the same color to achieve a different look.

   • Sequins can be sew on individually by stitching through the hole at the middle or they tin exist glued to the band. Employ whatsoever method is suited to your skill and what you feel looks all-time. You may wish to practice attaching them to flake material commencement.

4. 4

   Attach shapes. You can attach a variety of shapes to the headband as well. These can exist items you accept crafted yourself or they can be items purchased from a craft store. This can exist a great way to let your little girl'southward personality shine through. Choose items which tell people who she is. Stars, hearts, animals, or nutrient items all make good shapes to put on the ring.

   • You lot tin can brand these shapes yourself, using felt. You can just create the shape and cutting it from one or more pieces of felt and mucilage that to the band, or you can apply felting to create a 3D object to glue or stitch to the band. Information technology simply depends on your skill and desire.
   • You tin also use novelty buttons or scrapbooking decorations to embellish your headband. Gum or sew these as necessary.

Add together New Question

• Question

  How do I brand a baby headband knit?

  

  Cast on five stitches if thick wool, ten if thin. Knit normally until y'all cast off, then knit the two ends together.

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

• Likewise ensure that the headband does not slip and get caught effectually your baby's throat.

• Babies love to put things in their mouths. Make sure that anything modest you take attached to the headband will non come up loose.

• If you find the headband is too tight, do non put it on the babies head.

• Babies heads should have a rest from headbands, hair-ties,clips and other hair accessories later on and hr or so from wearing them.

Video

Things You lot'll Demand

• Material
• Scissors
• Sewing Auto
• Measuring Tape
• Safety Pin
• Elastic

About this commodity

Article Summary 10

To make a headband for your babe, mensurate your baby'due south head and cut a piece of stretch lace or bailiwick of jersey to the aforementioned length. Then, sew together the material into a ane inch thick tube, feed a length of rubberband through information technology, and sew the ends together. Next, tie a piece of ribbon into a bow, and wrap ane-two inches of ribbon around the eye to hide the knot. Finally, glue or sew the bow onto the headband. For tips on how to measure a infant'southward head for a headband, go on reading!

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 139,508 times.

Did this commodity assistance yous?

Source: https://www.wikihow.life/Make-Baby-Headbands

Posted by: rosadotrah1940.blogspot.com

Share this post